The Hellvape Dead Rabbit Mini RTA is a 23.5mm single-coil tank designed for restricted direct-lung, or RDL, use. Its official page confirms a top-to-bottom airflow layout, a honeycomb airflow deck and a 510 drip tip. One important documented distinction is the regional packaging: the standard and TPD editions have different published capacities and glass contents.
This specification-based first look uses Hellvape’s official product graphics, checked on 15 October 2026. It examines the documented design without claiming a hands-on test.
| Detail | What Hellvape confirms |
|---|---|
| Intended draw | RDL |
| Build type | Single coil |
| Base diameter | 23.5mm |
| Illustrated height | 41.3mm from the top of the fitted drip tip to the tank base; 46.1mm from the same starting point including the 510 connector |
| Net weight | 43g |
| Drip tip | 510 |
| Connector pin | Gold-plated 510 pin, labelled in the exploded view |
| Published capacity | 3.5ml / 2.0ml TPD |
| Airflow | Top-to-bottom routing with honeycomb airflow at the deck |
| Glass | Labelled Pyrex in the exploded view |
| Supplied coil | One 0.37Ω Ni80 Clapton coil |
| Finishes | Seven listed options |
Sources: official product page, specification graphic, exploded view and regional packing lists 7, 8.

Image note: The three blog visuals are AI-composed editorial illustrations based on product reference images, rather than hands-on photographs.
The Mini’s place in the Dead Rabbit range
Hellvape places the Mini in the RDL category, alongside separate DTL and MTL products in its range. It also highlights a compressed chamber. These details establish the intended draw category and internal layout. 4
RDL describes the intended draw category. The actual restriction also depends on the airflow setting and finished build; the page provides no measured draw-resistance figures.
The listed 23.5mm base diameter and 43g net weight describe the tank’s footprint and mass. The base measurement does not establish the widest point of the assembled tank with bubble glass fitted.
How the airflow is arranged
The official cutaway shows air entering near the top, travelling down internal passages and reaching the coil area through honeycomb openings. Vapour then travels upward through the central chimney. 5, 6
Hellvape attributes more even air distribution to the honeycomb arrangement and reduced leakage risk to the high external air inlets. Those are the design aims to assess in use. The diagrams establish the route; draw noise, flavour quality and how forgiving the tank is of different wicking still require testing.

A rebuildable tank with a supplied coil
The specification identifies a single-coil build, and the exploded view separates the deck, chamber, glass, airflow-control ring and top cap. The regional packing lists include a 0.37Ω Ni80 Clapton coil, shoelace cotton and a coil-cutting tool. 2, 3, 7, 8
The coil and cotton are separate rebuildable components, rather than a preassembled replacement cartridge.
The supplied coil’s nominal resistance is also not a universal power recommendation. The official graphics reviewed here do not provide a recommended wattage range for the tank, so there is no basis for assigning one from resistance alone.
Standard versus TPD: check the glass contents
| Edition | Published capacity | Separate bubble glass in the official list? |
|---|---|---|
| Standard | 3.5ml | Yes, one |
| TPD / UK TPD | 2.0ml TPD specification | Not listed |
Both packing graphics list the tank, coil, cotton, coil-cutting tool, accessory bag and manual. The standard-edition graphic adds a bubble glass; the combined TPD and UK TPD graphic does not. 7, 8
The specification panel gives regional capacity figures without assigning a separate capacity to each glass shape. It would therefore be inaccurate to label every straight glass as 3.5ml from this panel alone.
The Dead Rabbit Mini RTA name also matters when distinguishing its components from other Dead Rabbit models. The 23.5mm measurement describes the tank’s base, not the glass’s internal diameter. Hellvape’s reviewed graphics do not provide the glass tube’s separate height and internal diameter, or establish cross-model glass compatibility.
Seven finishes and a recognisable top ring

The official lineup lists Matte Full Black, Matte Black, Gunmetal, Blue, Matte S.S, Rainbow and Black Gold. The upper ring carries a small faceted decorative accent; the reviewed graphics do not specify its material. 9
What remains unverified?
The page establishes the dimensions, physical layout and regional kit differences. A hands-on review would still need to assess build access, wicking tolerance, heat, filling behaviour and long-term sealing. Manufacturer graphics alone cannot support a performance score or a comparison of flavour quality.
Common questions
Is the Dead Rabbit Mini RTA an MTL tank?
Hellvape positions it for RDL. Its compact size and 510 drip tip do not establish a tight MTL draw.
Does every edition include a bubble glass?
The official standard-edition list includes one. The TPD and UK TPD list does not show a separate bubble glass. This describes the published packing lists, rather than every possible retailer bundle.
What height does Hellvape list?
The drawing shows 41.3mm from the top of the fitted drip tip to the tank base, and 46.1mm when the threaded connector is included. The published base diameter is 23.5mm.
Official sources
All supporting panels below are hosted by Hellvape and appear on its Dead Rabbit Mini RTA product page.

