Official specifications checked: October 17, 2026.

The Hellvape Dead Rabbit Mini RTA and Dead Rabbit 4 RTA Pro suit different rebuilding routines. The Mini is a 23.5mm single-coil tank aimed at restricted direct-lung (RDL) vaping. The Pro is a 26mm dual-coil design aimed at direct-lung (DL) use. 1, 2
Our pick is the Mini for a compact single-coil RDL routine, and the Pro for a deliberate dual-coil DL setup. Start with the build you want to maintain; then weigh the capacity, fit on your mod and appearance.
This comparison uses official specifications and product imagery. Our recommendations are editorial judgments; flavour, draw noise, wicking tolerance and durability have not been tested side by side.
Specifications at a glance
| Detail | Dead Rabbit Mini RTA | Dead Rabbit 4 RTA Pro |
|---|---|---|
| Intended draw | RDL | DL / DTL |
| Build | Single coil | Dual coil |
| Published base diameter | 23.5mm | 26mm |
| Height: fitted drip tip to tank base | 41.3mm | 43.7mm |
| Height including 510 connector | 46.1mm | 48.5mm |
| Listed net weight | 43g | 59g |
| Drip tip type | 510 | 810 |
| Published capacity | 3.5ml; 2ml TPD | 3.5ml straight configuration; 5.5ml bubble; 2ml TPD |
| Airflow arrangement | Top-to-bottom, honeycomb at the deck | Top-to-bottom, 48-hole deck |
| Reservoir labels in exploded view | Pyrex glass tube | PCTG tube in the straight configuration |
Dimensions and capacities come from Hellvape’s specification and filling panels. The Mini’s capacity panel does not separately assign a volume to each glass shape. 3, 4, 5, 6, 7
Size: the real gains are footprint and weight
The matching height measurements differ by only 2.4mm. The clearer physical differences are the Mini’s 2.5mm narrower base and 16g lower listed weight. 3, 4
For us, the smaller footprint and lower mass are the Mini’s more persuasive physical advantages. The height saving is modest. Its narrower base may matter more on a compact mod than it does in a product photograph.
For a tight fit, check the widest assembled part too. The base diameter does not establish bubble-glass width or clearance beside a raised battery cap.

Capacity: compare the edition you will actually receive
For non-TPD configurations, Hellvape lists 3.5ml for the Mini and shows 3.5ml straight and 5.5ml bubble options for the Pro. Both have a published 2ml TPD specification. 3, 4, 5
The Pro’s largest listed capacity adds 2ml over the Mini’s. We see that as a useful supporting feature for someone who already wants dual-coil DL. The extra volume alone would not persuade us to change draw style: builds, power and puff habits determine how quickly that liquid is used.
With a 2ml local edition, both have the same published capacity. Draw preference, build upkeep and fit on the mod become the stronger deciding factors.
Both standard-edition packing lists include a separate bubble glass; their TPD / UK TPD lists omit it. Confirm the retailer’s actual bundle. 8, 9, 10, 11
Build differences: one coil to manage, or a matched pair
The Mini gives you one coil to position and wick; the Pro adds a second. For someone seeking fewer rebuilding steps, the Mini is our choice. How forgiving either tank is of different wicking still needs testing.
Hellvape illustrates a 13mm build-area span and a 48-hole deck on the Pro. Its “1mm wider” graphic compares it with the Dead Rabbit 3 RTA, not the Mini. 12, 13
The standard Mini list includes one nominal 0.37Ω Ni80 Clapton coil; the Pro list includes two. 8, 9
Two identical 0.37Ω coils in parallel have a theoretical combined resistance of about 0.185Ω. That calculation explains why the supplied single-coil ratings do not describe the same completed setup. Verify the actual assembled resistance; this figure is neither a guaranteed reading nor a wattage recommendation.

Airflow and filling: choose for the intended draw
Both route air from a high external inlet down towards the deck. The Mini combines this with its RDL positioning and 510 mouthpiece; the Pro uses a dual-coil deck and 810 mouthpiece. 1, 2, 6, 7
Those intended draw categories guide our recommendation. Restricting the Pro’s airflow does not establish that it will reproduce the Mini’s experience; the Mini’s 510 tip does not establish a tight MTL draw either.
The Pro also has an illustrated slide-open top-fill mechanism, a convenience that appeals to us for frequent refilling. Hole counts and filling mechanisms alone do not establish a flavour winner. 5
The cage and reservoir material deserve a closer look
We like the Pro’s enclosed metal-grid appearance; the Mini’s exposed reservoir gives it a simpler look. The cage adds an outer barrier, although no drop-test rating is established by the reviewed material.
Hellvape labels the Mini’s tube as Pyrex and the Pro’s illustrated straight tube as PCTG. The Pro’s packing list separately calls the spare item a bubble glass. Keep that distinction when shopping for parts. 6, 7, 9
Match the exact model and reservoir configuration. Base diameter is not tube internal diameter, and shared branding does not establish cross-model compatibility.
Common questions
Is the Dead Rabbit Mini RTA an MTL tank?
Hellvape positions it for RDL. Choose a tank specifically designed for MTL if a tight mouth-to-lung draw is your requirement. 1
Is the Pro much taller?
The difference is 2.4mm using matching endpoints: 41.3mm versus 43.7mm above the connector, or 46.1mm versus 48.5mm including it. 3, 4
Does the Pro always hold 5.5ml?
No. Hellvape identifies 5.5ml with its bubble configuration and separately lists 3.5ml straight and 2ml TPD options. Confirm the supplied configuration before buying. 4, 5
Our verdict
Our choice is the Mini for single-coil RDL and a smaller, lighter setup. Its combination of footprint and a one-coil routine is the main attraction. See our Dead Rabbit Mini RTA first look for the documented design.
Choose the 4 RTA Pro for a deliberate dual-coil DL setup, with larger non-TPD capacity and slide-open filling as useful supporting features. The cage is an additional design preference.
Our deciding order is draw style, build upkeep, fit on the mod, then the actual edition’s capacity. The right choice is the one that fits that routine.
Sources and image note
- Hellvape Dead Rabbit Mini RTA official page.
- Hellvape Dead Rabbit 4 RTA Pro official page.
- Mini specification and dimensions.
- Pro specification and dimensions.
- Pro filling and capacity configurations.
- Mini exploded components.
- Pro exploded components and PCTG label.
- Mini standard-edition packing list.
- Pro standard-edition packing list.
- Mini TPD / UK TPD packing list.
- Pro TPD / UK TPD packing list.
- Pro 13mm build-area illustration.
- Pro 48-hole deck illustration.
Sources checked on October 17, 2026. The three blog images are AI-assisted editorial compositions based on supplied product imagery. Product photographs and graphics do not substitute for a hands-on comparison.

