The SMOK MAESTRO MIX KIT has one mouthpiece and two separate 2 mL reservoirs, giving it 4 mL in total. The Top Pod has the mouthpiece. A second cartridge, the Boost Pod, slides in from the bottom. Both can feed vapour to the same draw, and each has its own power setting. [1]
What interests me is the option to keep a familiar liquid in the Top Pod and bring in a second one only when you want it. That flexibility comes with a small shopping complication: both positions take a 0.8 Ω cartridge, but the two cartridges have different shapes.

The mouthpiece belongs to the Top Pod. The Boost Pod enters through the base and has its own 2 mL reservoir.
Top Pod vs Boost Pod
| What to check | MAESTRO MIX Top Pod | MAESTRO MIX Boost Pod |
|---|---|---|
| Where it fits | At the top, with the mouthpiece | At the bottom |
| Capacity | 2 mL | 2 mL |
| How it fills | From the top, under the mouthpiece cap | Through a side plug after removing the pod |
| Mesh coil options | 0.6 Ω and 0.8 Ω | 0.8 Ω |
| SMOK’s recommended power | 17–20 W for 0.6 Ω, 14–16 W for 0.8 Ω | 14–16 W for 0.8 Ω |
Both pods have a built-in mesh coil, so a worn coil means replacing that cartridge. The Top Pod has a spring-loaded filling port under the mouthpiece cap. The Boost Pod comes out of the base and fills through a side plug. When ordering, look for MAESTRO MIX Top Pod or MAESTRO MIX Boost Pod on the pack. [2] [5]

Left, the Top Pod with mouthpiece. Right, the flat-ended Boost Pod. Both are sold in 0.8 Ω.
What the 50 W rating means
The device offers 5–30 W for Top and 5–20 W for Boost. That explains the 50 W on the spec sheet. For the pre-installed pair, SMOK highlights 18 W for the 0.6 Ω Top Pod and 15 W for the 0.8 Ω Boost Pod. Those settings add up to 33 W when both are active. They tell you how power is allocated. You can’t read a flavour ratio from those numbers. [1] [2]
The 1.47-inch colour screen shows both wattages, and the side dial lets you adjust the channels separately. The kit is draw-activated and has adjustable airflow. The retailer’s control guide also shows an OFF setting for the selected channel. To judge what Boost adds, keep the Top setting, its liquid and the airflow the same, then compare with Boost on and off. [1] [3]

The figures on the left are SMOK’s reference settings for the two pre-installed pods. The screen in the product render shows the channel maximums.
Battery, charging and size
The built-in battery is 1,300 mAh, with 2.1 A USB-C charging listed by SMOK. The brand advertises a full charge in about 30 minutes. How often Boost is active and the power you select will affect how long the battery lasts between charges. The listed dimensions are 81.95 × 55.3 × 18 mm, with a weight of 90 g. It’s a short, wide body with a dial at the edge. [1]
What comes in the box?
SMOK’s listed 2 mL kit includes the device with a 0.6 Ω Top Pod and 0.8 Ω Boost Pod already installed. The box adds a 0.8 Ω Top Pod, another 0.8 Ω Boost Pod, a USB-C cable, a lanyard and a manual. Of the two spares, only the Boost Pod is a like-for-like replacement for the pre-installed one. If you fit the spare 0.8 Ω Top Pod, check the Top setting: its recommended range is 14–16 W. [2] [4]
First-look verdict
I’d choose the MAESTRO MIX if I wanted to add a second liquid occasionally without premixing a full tank. If you usually stay with one liquid, a single-pod kit has one fill port and just one type of spare to keep track of. Before choosing the MIX, I’d check that my usual supplier stocks both pod shapes.



