Reviews

OXVA VPRIME 2 First Look: More Endurance, More Weight

An objective OXVA VPRIME 2 first look covering its 3400mAh battery, 6ml dual-mesh pods, 60W output, compatibility and upgrade trade-offs.

The OXVA VPRIME 2 does not increase the original model’s 60W ceiling. It does something potentially more useful: it builds a larger battery, faster charging and a new dual-mesh cartridge around the power the VPRIME already had.

That decision gives the sequel a clear purpose. The first VPRIME proved that auto-draw could work in a 60W DTL-oriented pod. VPRIME 2 now tries to make that format last longer between charges and refills while offering a choice between stronger performance and more economical use.

There is a cost. The battery grows from 2600mAh to 3400mAh, but weight rises from 116g to 150g. This is a more capable device on paper, not a smaller or lighter one.

Quick verdict: Based on OXVA’s published specifications, the VPRIME 2 is a meaningful endurance and cartridge upgrade for DTL and RDL users. Its 3400mAh battery, 3A charging, 6ml dual-mesh pods and cross-generation cartridge support are convincing. Buyers prioritizing pocket comfort may still prefer the lighter original VPRIME.

This is a first-look buyer’s analysis based on OXVA’s official specifications and product materials, not a hands-on or long-term test. Battery runtime, pod lifespan, flavor and leak resistance require real-world verification.

Blue and black OXVA VPRIME 2 pod kits showing the 60W color display

OXVA VPRIME 2 specifications

Feature OXVA VPRIME 2
Output power 5–60W
Battery 3400mAh built-in
Charging USB-C, 5V/3A
Activation Auto-draw and fire button
Claimed response 0.01-second auto-draw
Display 0.98-inch color screen
Airflow Side airflow control
Kit cartridges VPRIME Dual Mesh 0.4Ω and 0.6Ω
Capacity 6ml standard; 2ml TPD
Filling Top fill
Modes BOOST and ECO
Dimensions 113.12 × 41.2 × 27.7mm
Weight 150g
Material Zinc alloy and IML

The standard package includes the device, one pre-installed 0.4Ω dual-mesh cartridge, one 0.6Ω dual-mesh cartridge, a USB-C cable, user manual and suggestion card. Regional package contents and capacity may vary.

VPRIME 2 vs VPRIME: what changed?

Area VPRIME 2 Original VPRIME Buying impact
Maximum output 60W 60W The upgrade is not about more peak power
Battery 3400mAh 2600mAh About 31% more rated capacity
Charging 5V/3A 5V/2A Higher supported charging input
Standard capacity 6ml 5ml Fewer refill interruptions
Kit pod 0.4Ω/0.6Ω dual mesh 0.2Ω/0.6Ω original cartridges New performance/endurance approach
Technology Dual Mesh, UNITECH 3.0 UNITECH 2.0 Revised heating and airflow system
Screen 0.98-inch color 0.96-inch color Small display-size change
Auto-draw Claimed 0.01 seconds Claimed 0.01 seconds A retained strength, not a new feature
Size 113.12 × 41.2 × 27.7mm 105.5 × 37.8 × 23.45mm VPRIME 2 is larger in every dimension
Weight 150g 116g 34g heavier

This is a better upgrade story than a simple “V2 means more power” message. OXVA has kept the output limit and fast auto-draw concept, then concentrated on the parts that influence a full day of use: battery reserve, charging, liquid capacity and cartridge behavior.

The 3400mAh battery is the headline upgrade

An extra 800mAh represents roughly 31% more rated capacity than the original VPRIME. Under comparable settings and use, that should reduce charging frequency. It does not guarantee a fixed number of hours because runtime changes substantially with wattage, draw length, airflow and mode.

The benefit may be most visible to users running the 0.4Ω pod in BOOST mode. Higher-output DTL use consumes energy quickly, so additional capacity is more meaningful here than it would be on a low-power stick pod.

Charging rises from 5V/2A to 5V/3A. OXVA says the battery can reach 50% in about 20 minutes under its test conditions. Actual charging time depends on the adapter, cable, temperature and battery state, and a 3A-compatible power source is required to reach the device’s maximum input.

The compromise is physical. At 150g, VPRIME 2 is 34g heavier than the original. It should feel more substantial in the hand and pocket. Users who equate a pod system with minimal weight need to consider that before upgrading.

Dual mesh is more than a flavor claim

The new VPRIME Dual Mesh Cartridge comes in 0.4Ω and 0.6Ω versions. Its most interesting feature is not simply having two mesh elements; it is how OXVA uses them in two modes.

OXVA VPRIME 2 dual-mesh pod producing vapor in BOOST mode

  • BOOST mode prioritizes denser vapor and stronger delivery by using the dual-mesh performance profile.
  • ECO mode prioritizes battery efficiency and cartridge lifespan with a more conservative single-mesh profile.

OXVA describes the 0.4Ω cartridge in BOOST as performing similarly to a 0.2Ω setup, while the 0.6Ω version is compared with 0.3Ω. These are manufacturer performance comparisons, not literal resistance changes. Buyers should not treat “0.4Ω ≈ 0.2Ω” as an electrical specification or use it to calculate power independently.

The practical advantage is choice without changing the pod. A user can choose BOOST for a more forceful session and return to ECO when battery life or lower liquid consumption matters more.

The trade-off is predictability. Mode, wattage and airflow all affect the result, so the dual-mesh label alone cannot confirm flavor quality or pod lifespan. OXVA’s “200% flavor” and “200% lifespan” language should be treated as controlled manufacturer marketing until independent testing establishes the conditions and repeatability.

UNITECH 3.0 focuses on airflow and condensation

OXVA describes UNITECH 3.0 as an optimized U-shaped airway combined with an enlarged condensate collection chamber. The goal is smoother airflow and better control of liquid collecting inside the cartridge and device.

That design is relevant for a DTL pod, where higher airflow and vapor production can create more condensation. It may help keep the contact area cleaner, but it does not make the system leak-proof. Filling technique, worn seals, temperature changes and leaving a filled pod on its side can still lead to moisture.

The side airflow slider allows adjustment from a tighter RDL draw toward a more open DTL draw. Although older VPRIME cartridges expand the resistance choices, the new dual-mesh kit configuration is clearly centered on RDL and DTL rather than the tightest MTL experience.

Pod compatibility may be the smartest part of the upgrade

OXVA states that VPRIME and VPRIME 2 cartridges are cross-compatible. That gives buyers two useful paths:

  1. Existing VPRIME owners can continue using compatible cartridges they already have.
  2. VPRIME 2 owners can access the original VPRIME range, including 0.2Ω, 0.4Ω, 0.6Ω and 0.8Ω options, rather than being limited to the two new dual-mesh pods.

There is also a 2ml empty VPRIME cartridge that accepts separate 0.4Ω and 0.6Ω replacement coils.

Compatibility still needs precise wording. A cartridge physically working on both devices does not mean every mode or screen function behaves identically. OXVA markets VPRIME 2 plus the new dual-mesh cartridge as the combination that unlocks the full BOOST/ECO experience. Buyers should confirm mode support rather than assuming the original device gains every VPRIME 2 feature from a pod swap.

Familiar controls with better carry protection

The 0.98-inch color display is only slightly larger than the original 0.96-inch panel, so screen size alone is not a reason to upgrade. It shows power, battery status and operating mode, with three interface themes and two vaping animations.

Purple OXVA VPRIME 2 showing its color screen and physical controls

The more practical improvement is protection against accidental firing. VPRIME 2 combines a physical side lock with an automatic lock response after three accidental button presses. Auto-draw and button activation remain available, allowing the user to choose between effortless operation and deliberate manual firing.

Control remains concentrated around one main button:

  • Two clicks change the interface theme.
  • Three clicks adjust wattage.
  • Four clicks switch between BOOST and ECO.
  • Five clicks turn the device on or off.
  • Seven clicks reset the puff counter.

This layout avoids a multi-button menu, although remembering several click combinations may take time. The physical lock is the simpler option before placing the device in a pocket or bag.

Bigger capacity, but no longer a compact lightweight

The standard 6ml cartridge adds 1ml over the original VPRIME and may reduce refill frequency. The TPD version remains 2ml. OXVA lists top filling, which is convenient because routine refilling should not require pulling the cartridge from the device.

However, the larger battery and pod change the product’s character. VPRIME 2 is 7.62mm taller, 3.4mm wider, 4.25mm thicker and roughly 29% heavier than the original.

That makes it better described as a compact DTL pod mod than a pocket-first pod. Buyers gain endurance and capacity, but the original remains more attractive if low weight and smaller dimensions take priority.

Who should buy the OXVA VPRIME 2?

VPRIME 2 is likely to suit:

  • DTL and RDL users who regularly drain smaller pod batteries.
  • Original VPRIME owners who want longer runtime and faster charging.
  • Users interested in switching between stronger BOOST and more economical ECO operation.
  • Buyers who value auto-draw but still want button activation and wattage control.
  • Existing VPRIME users who want to retain access to compatible cartridges.
  • People who prefer a large standard-capacity pod with top filling.

It may be less suitable for:

  • Buyers seeking the lightest or smallest possible pod.
  • Tight-MTL users who do not need a 60W DTL-oriented platform.
  • Anyone who prefers a replaceable external battery.
  • Original VPRIME owners already satisfied with 2600mAh and 2A charging.
  • Users who expect manufacturer flavor or lifespan percentages to translate directly into everyday results.

Strengths and limitations at a glance

Notable strengths

  • 3400mAh battery with 5V/3A charging.
  • 60W output with both auto-draw and button firing.
  • 6ml dual-mesh cartridge outside TPD markets.
  • BOOST and ECO profiles within the same pod.
  • Cross-generation VPRIME cartridge compatibility.
  • Top filling and adjustable side airflow.
  • Physical lock plus automatic anti-misfire behavior.

Important limitations

  • 150g is heavy for a pod system.
  • The larger body is less pocket-friendly than the original.
  • Peak output remains 60W.
  • New kit pods focus more on RDL/DTL than tight MTL.
  • The battery is built in and cannot be swapped.
  • Flavor, lifespan and anti-leak claims still require independent testing.

Final verdict

The OXVA VPRIME 2 is not a radical reinvention. It preserves the original’s 60W limit, dual activation and fast auto-draw, then strengthens the areas most likely to interrupt high-output pod use.

The 3400mAh battery and 3A charging are its most dependable upgrades. The 6ml dual-mesh cartridge and BOOST/ECO system are more ambitious, offering two performance priorities without requiring a pod change. Cross-generation cartridge support also makes the transition less disruptive for existing VPRIME owners.

Yet the sequel is not automatically better for everyone. A 150g device is notably heavier than the 116g original, and the larger dimensions move it closer to pod-mod territory. Anyone satisfied with the first model’s endurance may value its portability more than the new features.

For DTL and RDL users who want fewer charging and refilling interruptions, VPRIME 2 looks like a focused, worthwhile evolution. For buyers who want a small pod above all else, the original VPRIME—or another lighter platform—may remain the smarter choice.

Frequently asked questions

What is the biggest upgrade in the OXVA VPRIME 2?

The clearest upgrade is battery capacity: 3400mAh compared with 2600mAh in the original VPRIME. Charging also increases from 5V/2A to 5V/3A.

Is the VPRIME 2 more powerful than the original VPRIME?

No. Both devices have a maximum output of 60W. VPRIME 2 focuses on endurance, charging, dual-mesh cartridges and UNITECH 3.0 rather than raising peak wattage.

Are original VPRIME pods compatible with VPRIME 2?

Yes. OXVA states that the VPRIME series cartridges are cross-compatible. Mode availability can differ, so cartridge compatibility should not be interpreted as identical features on both devices.

What is the difference between BOOST and ECO mode?

BOOST prioritizes stronger dual-mesh performance and denser vapor. ECO uses a more conservative profile intended to extend battery and pod life.

Does the VPRIME 2 support auto-draw?

Yes. It supports both auto-draw and button activation. OXVA claims a 0.01-second auto-draw response under its test conditions.

Is the OXVA VPRIME 2 suitable for MTL vaping?

The wider VPRIME cartridge ecosystem includes higher-resistance options, but the included 0.4Ω and 0.6Ω dual-mesh pods and adjustable airflow position the standard kit mainly toward RDL and DTL use.

How large is the VPRIME 2 cartridge?

The standard version is 6ml. The TPD version is 2ml. Availability depends on regional regulation.

How heavy is the OXVA VPRIME 2?

OXVA lists it at 150g, which is 34g heavier than the original VPRIME. Buyers prioritizing pocket comfort should consider this difference.

Sources

Product information checked September 11, 2026:

Specifications, cartridge capacity and package contents may vary by market. Confirm the final retail package before purchase.

Age notice: This product is intended only for adults of legal smoking or vaping age. Keep vaping products and e-liquid away from children and pets.