The Lost Vape Thelema Q200 Pro Kit pairs a 200W dual-18650 box mod with the Centaurus Sub Ohm V2 Tank. It is a full-size direct-to-lung setup built around the Quest X 3.0 chipset, a 1.47-inch TFT display, six operating modes and replaceable UB Max V2 coils.
The headline number is 200W, but the more meaningful story is how the complete kit fits together. The supplied 0.15Ω and 0.3Ω coils cover 40–100W, the tank moves filling and airflow to the top, and the physical power switch gives the mod a clear transport control. The 200W ceiling provides headroom; it is not the expected setting for either included coil.
This is a specification-based first look, not a hands-on review. Output accuracy, battery life, temperature-control behavior, airflow noise, flavor and leak resistance require testing with a retail unit.

Thelema Q200 Pro specifications
| Specification | Published detail |
|---|---|
| Output range | 5–200W |
| Chipset | Quest X 3.0 |
| Operating modes | Six confirmed by Lost Vape; current retailer materials list WATT, BOOST, VOLTAGE, SS316, Ti and Ni |
| Batteries | 2 × 18650, removable, not included |
| Battery voltage | 6.0–8.4V |
| Supported resistance | 0.1–3.0Ω |
| Charging | USB-C, 5V/2A |
| Display | 1.47-inch TFT, nine UI themes |
| Mod dimensions | 28 × 57 × 92mm |
| Listed mod weight | 150g ±5g |
| Mod materials | Zinc alloy and PU leather |
| Tank | Centaurus Sub Ohm V2 |
| Tank capacity | 5ml standard with spare 3ml glass; 2ml TPD |
| Tank airflow and filling | Adjustable top airflow; locked top-fill system |
| Coil platform | UB Max V2, 0.15Ω / 0.2Ω / 0.3Ω |
| Included coils | 0.15Ω X1 V2 and 0.3Ω X3 V2 |
Lost Vape describes the exterior as a natural-leather design, while the technical specification lists PU leather. The material specification is the safer description when judging what buyers actually receive.
What Quest X 3.0 adds
Current retailer materials list WATT, BOOST, VOLTAGE, SS316, Ti and Ni modes. Lost Vape’s visible product page confirms six modes but does not explain the behavior of each one, so exact mode operation should be checked against the final user manual.
Those options give the Q200 Pro broader control than a simple wattage-only kit, but they also make it better suited to users who already understand coil limits. A mode name is not proof that every atomizer or wire type is suitable. The installed coil and its published range should determine the starting setting.
The 1.47-inch TFT is a substantial change from the smaller screens used on several earlier Lost Vape dual-battery mods. Lost Vape lists nine interface themes, and three fire-button presses open modes, themes, screen settings and the power-lock menu. A separate toggle switches the device on and off, which is more direct than relying only on repeated fire-button clicks.
Dual 18650 power: flexible, but batteries require care
Two removable 18650 cells provide replaceable-battery convenience and support the mod’s high output range. They are not included in either official kit list.
Use an authentic matched pair of the same model and age. Keep the cells together as a married pair, inspect the wraps and terminals regularly, and do not combine a new cell with an older one. The USB-C port is manufacturer-listed at 5V/2A, but a suitable external charger remains useful for inspecting and managing removable cells individually.
At a listed 150g ±5g before accounting for the complete tank-and-battery setup, this is not a lightweight pod device. Its advantages are replaceable cells, output range and control—not pocket minimalism.
Centaurus Sub Ohm V2: top lock, top fill and top airflow
The bundled Centaurus Sub Ohm V2 places its fill mechanism and adjustable airflow at the top. The cap includes a lock intended to reduce accidental opening. Top airflow also removes the most direct liquid path through a bottom airflow ring, although no tank should be treated as completely leak-proof.
Lost Vape lists a 5ml standard tank with a spare 3ml straight glass. The TPD kit uses a 2ml tank and a second 2ml glass. The V2 tank is listed at 30mm across its wider configuration and 26.8mm across the narrower section, with a height of 58.5mm.
The standard kit includes two UB Max coils:
| UB Max V2 coil | Manufacturer-listed range | Included? |
|---|---|---|
| X1 V2 0.15Ω | 80–100W | Yes |
| X2 V2 0.2Ω | 60–80W | No |
| X3 V2 0.3Ω | 40–60W | Yes |
The 0.3Ω coil provides the lower-power starting option on paper, while the 0.15Ω coil occupies the higher part of the tank’s listed range. Actual warmth, vapor production and e-liquid use still depend on airflow, liquid and individual draw style. Prime a new coil fully and begin near the lower end of its printed range before increasing power gradually.
Thelema Q200 Pro vs Centaurus M200
The Centaurus M200 is a useful comparison because both devices are 200W Lost Vape mods powered by two 18650 cells. They are not the same chassis, however, and their accessories should not be mixed.
| Feature | Thelema Q200 Pro | Centaurus M200 |
|---|---|---|
| Maximum output | 200W | 200W |
| Chipset | Quest X 3.0 | Quest 2.0 |
| Batteries | Dual 18650 | Dual 18650 |
| Display | 1.47-inch TFT | 0.96-inch color display |
| Main controls | Fire button, adjustment controls and on/off toggle | 3-in-1 jog dial and on/off toggle |
| Dimensions | 28 × 57 × 92mm | 26 × 56.7 × 93mm |
| Listed weight | 150g ±5g | 152g ±5g |
| Body materials | Zinc alloy and PU leather | Aluminum alloy and stainless steel |
| Current kit focus | Centaurus Sub Ohm V2 Tank | Earlier Centaurus platform configurations vary by listing |
The Q200 Pro emphasizes a larger screen, more themes, six modes and a leather-look side panel. The M200’s distinguishing feature is its rotary jog-dial interface and aluminum frame.
For owners of the older device, Momovaping sells a protective silicone case molded for the Centaurus M200. It is a relevant accessory for readers comparing these two mods, but it should not be presented as a Thelema Q200 Pro case: the dimensions and control openings differ.
Replacement glass: check the exact V2 option
Glass compatibility deserves the same caution as mod cases. A shared Centaurus name or 5ml capacity does not by itself guarantee the same dimensions.
Momovaping lists a 5ml Centaurus tank replacement glass. Other current replacement-glass listings state that the 5ml Centaurus glass fits both the original Sub Ohm Tank and the V2, while some smaller-capacity versions do not fit the V2. Momovaping’s current page does not explicitly name the V2 in its selectable model, so confirm Centaurus Sub Ohm V2 and 5ml compatibility with the seller before ordering.
When replacing glass, inspect the O-rings for cuts, flattening or displacement. A correctly sized tube can still leak if a seal is damaged or pinched during reassembly.
Standard and TPD kit contents
The official standard kit contains:
- Thelema Q200 Pro Box Mod
- Centaurus Sub Ohm V2 Tank, 5ml
- 0.15Ω UB Max X1 Coil V2 Edition
- 0.3Ω UB Max X3 Coil V2 Edition
- Spare 3ml glass tube
- Spare parts pack
- USB-C cable
- Two user manuals and a warranty card
The TPD kit changes the installed tank and spare glass to 2ml. Batteries remain excluded. Retail packaging can vary, so buyers should check the regional box rather than assuming every listing follows the international configuration.
Who should consider it?
On specifications alone, the Thelema Q200 Pro may suit an experienced adult DTL user who wants removable batteries, a large display, several power modes and a top-airflow tank in one package. The included 40–100W coil coverage is more relevant to daily use than the 200W maximum.
It is less appropriate for someone looking for a small starter device or a simple low-power MTL draw. The kit requires separate batteries, battery-pair discipline and regular coil and tank maintenance. Temperature-control modes also add value only when used with the correct wire and sufficient setup knowledge.
Early verdict
The Thelema Q200 Pro looks like a well-equipped option for buyers who value screen size, interface choice and a complete dual-battery DTL setup. Pairing it with the Centaurus Sub Ohm V2 gives the kit a coherent 40–100W operating window, top-side filling and an established UB Max coil family.
The main reservations are practical: the assembled kit will be heavy, batteries cost extra, and neither flavor nor leak resistance can be confirmed from specifications. A full recommendation should wait for hands-on testing of output behavior, controls, battery runtime, tank sealing and both included coils.
Sources and editorial note
Specifications, coil ranges and package contents were checked against the official Lost Vape Thelema Q200 Pro product page and Centaurus Sub Ohm V2 Tank product page on August 26, 2026. Centaurus M200 dimensions and controls were checked against Lost Vape’s M200 user manual. Current retail information from Ecigone was used to cross-check the six mode names. Replacement-glass fit should be confirmed with the seller because listings do not describe every capacity and tank revision consistently. This article does not claim hands-on or laboratory testing.
Vaping products are intended for adults where legally permitted. Nicotine is addictive. Keep devices, batteries and e-liquid away from children and pets, follow local laws, and read the supplied safety instructions before use.

