Compatibility

Lost Vape E PLUS V2 DM Pods: Compatibility, Resistance and ECO/Boost Modes

Understand E PLUS V2 DM pod compatibility, the three cartridge versions, mode-dependent resistance and the host requirements behind ECO and Boost.

Lost Vape lists three E PLUS Cartridge V2 DM Top Fill versions: 0.3Ω DTL, 0.3Ω MTL and 0.6Ω. Its mode table gives different operating-resistance and power entries for Boost and ECO. A 0.3Ω version is listed as 0.6Ω in ECO; the 0.6Ω version is listed as 1.2Ω in ECO. 1

The key distinction is between which cartridge is fitted and how a supported host operates it. A changed resistance entry does not automatically mean the wrong cartridge has been supplied. Equally, a compatible physical fit does not establish that every host offers identical mode controls or the full published power range.

Documentation checked on 26 October 2026. This article explains the manufacturer’s specifications; it does not report electrical bench testing, flavour testing or measured cartridge life.

AI-generated illustration: Lost Vape E PLUS V2 DM cartridges labelled 0.3 ohm DTL, 0.3 ohm MTL and 0.6 ohm

AI-generated editorial illustration using official cartridge images as references, not a product photograph. Labels identify the published versions; colour and small visual details are not reliable compatibility evidence.

Read the complete cartridge name first

E PLUS is a platform name, not one interchangeable description for every consumable within it. Lost Vape separately documents V2 single-mesh top-fill cartridges, V2 DM top-fill cartridges and other E PLUS arrangements, including replaceable-coil options. 1 2 3

The DM designation matters here. A 0.6Ω single-mesh V2 cartridge and a 0.6Ω V2 DM cartridge should not be treated as identical merely because their labels share a resistance value. The construction and supported operation need to be checked as well.

I would identify a cartridge by its full family, generation, construction and draw variant before considering the resistance alone. That is particularly important with the two 0.3Ω versions: one is labelled DTL and the other MTL. Their equal nominal resistance does not establish an equal draw.

The published resistance and power combinations

Cartridge version Published Boost entry Published ECO entry Listed draw type
0.3Ω DTL 0.3Ω, 30–45W 0.6Ω, 16–25W DTL
0.3Ω MTL 0.3Ω, 30–45W 0.6Ω, 16–25W MTL
0.6Ω 0.6Ω, 16–25W 1.2Ω, 5–13W RDL–MTL

Source: the V2 DM specification table. 1 These are manufacturer-published mode entries, not measurements taken from every compatible device. The host’s supported modes, output limits and resistance handling still apply.

The 0.3Ω MTL row is easy to misread if resistance is used as a shortcut for draw style. Lost Vape gives it the same electrical mode entries as the 0.3Ω DTL version while describing a tighter draw. The airflow configuration is therefore part of the product identity, not a detail that the resistance number can replace.

Another useful distinction is between nominal cartridge labelling and the active configuration. The table’s 0.3Ω-to-0.6Ω change is associated with mode selection; it is not an instruction to change cartridge halfway through the comparison. Nor does a 1.2Ω ECO entry establish that a separate 1.2Ω V2 DM retail version is supplied in the range shown above.

What ECO and Boost actually describe

Lost Vape describes Boost as operating the two meshes together and ECO as operating them alternately. 1 That gives a technical reason to keep the mode descriptions separate from a generic “high” and “low” power label.

The manufacturer’s explanation is useful, but it is not a complete electrical characterisation. This article has not measured the switching pattern, current, temperature or resistance reporting of each host. It would be misleading to turn a marketing animation into a verified waveform diagram.

AI-generated illustration: A complete orange-base E PLUS V2 DM pod beside the editorial text One pod Two modes

Mode operation requires an appropriate host device. This illustration shows an intact cartridge, not self-powered electronics or a measured heating pattern.

The documented distinction is a change of operating configuration within a supported cartridge-and-device pairing. The size of any efficiency or lifespan benefit remains a test question. A mode name cannot guarantee a fixed reduction in liquid use or a fixed number of extra days.

Compatibility has more than one level

A practical compatibility check has three parts: the exact cartridge must be supported, the host must provide the required operating behaviour, and the requested output must be within the host’s limits.

The following are documented examples rather than a blanket list for all Lost Vape devices.

Host example Evidence for the pairing or platform What still needs attention
Thelema Aura 45 Named in the V2 DM compatibility graphic; its device page provides Boost/ECO controls Check the fitted cartridge and the active mode
Thelema Elite S Named in the V2 DM graphic; its manual documents ECO/Boost switching Use its own operating instructions and limits
Thelema Elite 40 Named in the V2 DM graphic; its manual specifies 5–40W and 0.3–1.0Ω Full 45W operation or support for the 1.2Ω ECO entry is not established by that manual
Centaurus E40 Ultra Its device page lists E PLUS Dual Mesh V1–V2 compatibility and ECO/Boost Keep the Ultra model distinct from older E40 devices

Sources: cartridge page, individual device documentation and manuals. 1 3 4 5 6

This is where I would resist the phrase “fully compatible” without a model attached. A platform can preserve consumable continuity while the bodies differ in controls and output. A mode selector shown on Aura 45 cannot be assumed to exist in the same form on an older device.

Lost Vape’s cartridge compatibility graphic also contains repeated or abbreviated model captions. I would not turn that graphic into an unrestricted “all Thelema” or “all Centaurus” claim. The table above uses specific models whose device documentation provides useful context, and it does not extend E PLUS fit to URSA or Ultra S products merely because the brand matches.

Top fill and capacity are separate specifications

The V2 DM page lists 3mL capacity and 2mL TPD versions for all three cartridge variants. 1 A resistance or draw label does not identify the regional capacity.

Official product images show a filling plug in the cartridge’s upper section. The supplied quick guide remains the reference for opening and closing it in the intended setup; the Top Fill name does not establish identical access on every host while assembled.

AI-generated illustration: Blue-base Lost Vape E PLUS V2 DM cartridge showing the closed upper filling area and complete exterior

The filling plug remains closed in this exterior illustration. The image does not replace the cartridge quick guide or establish fit from appearance alone.

For an existing E PLUS user, the useful check is the complete printed specification: V2 DM, the draw variant, the nominal resistance and the capacity. Matching the base colour or a familiar silhouette is weaker evidence than matching those details.

How much weight should lifespan claims carry?

Lost Vape advertises up to 60mL of cartridge life on the V2 DM page. 1 That is a manufacturer claim, not a result reproduced here or a guaranteed replacement interval.

A meaningful lifespan comparison would specify the liquid, mode, power, puff pattern and reason for replacement. “Lasted longer” is difficult to compare if one test ends at a mild taste change while another continues until obvious degradation. Switching modes or liquid during the test adds further variables.

I would therefore treat the mode table as the useful operating information and the endurance claim as something to investigate. The strongest part of this product’s documented story is its configurable dual-mesh operation; the published material does not establish an individual user’s consumption or maintenance schedule.

Frequently asked questions

Why can a 0.3Ω V2 DM pod show a 0.6Ω ECO entry?

Lost Vape’s table associates the 0.3Ω versions with 0.3Ω in Boost and 0.6Ω in ECO. It also describes different mesh operation between modes. The exact host and active mode should be checked before treating that change as a fault. 1

Is the 0.3Ω MTL cartridge the same as 0.3Ω DTL?

They share the published electrical mode entries but have different draw classifications. Resistance alone does not identify the variant. 1

Will V2 DM unlock Boost on any E PLUS-compatible device?

Physical or platform compatibility does not establish a universal mode upgrade. Verify the specific host’s controls and limits; a cartridge cannot add undocumented controls to a body.

Is V2 single mesh the same as V2 DM?

No. Lost Vape documents them separately. Use the complete cartridge name rather than matching only “V2” and a resistance number. 1 2

Sources

  1. Lost Vape E PLUS Cartridge V2 DM Top Fill: variants, mode table and compatibility graphic
  2. Lost Vape E PLUS Cartridge V2 Top Fill: separate single-mesh product
  3. Thelema Aura 45: E PLUS platform and Boost/ECO controls
  4. Official Thelema Elite S manual: mode switching
  5. Official Thelema Elite 40 manual: 5–40W device limit
  6. Centaurus E40 Ultra: Dual Mesh V1–V2 compatibility and power modes