Comparisons

SMOK ARCO S2 vs ARCO S1: Battery Access and ARCO Pod Compatibility

Which ARCO Pods fit both SMOK kits? Compare the ARCO S2’s replaceable battery, the S1’s built-in battery and what each indicator means at half charge.

The SMOK ARCO S2 makes sense if the battery is the part you want to replace. Its 1300 mAh module comes out of the body. The ARCO S1 has the same rated capacity, a built-in battery and the same choice of ARCO Pods. If your S1 still holds a charge and all you need is a fresh pod, I’d keep it. [1] [2]

Official SMOK ARCO S2 and ARCO S1 product renders side by side

ARCO S2 vs ARCO S1 at a glance

Feature SMOK ARCO S2 SMOK ARCO S1
Battery Replaceable 1300 mAh module Built-in 1300 mAh
On-device charging USB-C, rated up to 1.3 A USB-C, rated up to 1.3 A
Rated output 10–30 W 10–30 W
Pod family ARCO Pod ARCO Pod
Preinstalled ARCO Pod One 0.6 Ω mesh pod, 2 mL or 3 mL to match the kit One 0.6 Ω mesh pod, 2 mL or 3 mL to match the kit

Both devices read the pod resistance and set the output automatically. The 30 W figure is the ceiling. [1] [2]

What the replaceable battery changes

When an S2 battery wears out, you can keep the body and replace the module. A second, charged module also lets you swap batteries away from a USB-C outlet. SMOK lists the device, one pod and the manual in the kit. Factor the price and availability of an ARCO S2 replacement module into the comparison. [1]

An official ARCO S2 detail shows the battery module and detached bottom cap

How to read the battery light

At about 50% charge, the S1 light is green and the S2 light is blue. The S1 uses green across most of its charge range. The S2 splits that range into two bands, so a change from green to blue gives you an earlier cue to take a spare. [1] [2]

Can you carry your ARCO Pods over?

Yes. Both device pages list ARCO Pods. Look for ARCO Pod on the replacement pack, then match the resistance and capacity you want. SMOK’s charts show 0.6 Ω, 0.8 Ω and 1.1 Ω in 2 mL, and 0.4 Ω, 0.6 Ω, 0.8 Ω and 1.1 Ω in 3 mL. Those are the configurations shown for these kits. Check the exact pack when shopping, since resistance alone can identify more than one capacity. [1] [2]

Check the spelling on the box. SMOK also makes an ACRO series with a 0.8 Ω pod. For the S1 and S2, the name you want is ARCO Pod, even when the resistance and capacity match. [3]

Official 2 mL and 3 mL ARCO Pod renders shown side by side

The 0.6 Ω pod is the sensible starting point for a like-for-like replacement because both kits ship with one. SMOK recommends 21 W for that option and 16 W for the 0.8 Ω, a lower-power choice for a mouth-to-lung draw. If you already like the 0.8 Ω in your ARCO S1, you can keep buying that same ARCO Pod for the ARCO S2. [1] [2]

Which kit would I choose?

At similar kit prices, I’d pick the ARCO S2 if I could buy its spare module locally. If the module is hard to find, the strongest reason to pay extra disappears. A working ARCO S1 already covers the same selection of pods.

Sources

  1. SMOK ARCO S2 product page, ARCO Pod chart and kit contents
  2. SMOK ARCO S1 KIT product page, ARCO Pod chart and kit contents
  3. SMOK ACRO KIT and its separate pod family